Xiaomi Mi Wi-Fi 4c Router Setup

Xiaomi Mi Wi-Fi 4c Router Setup

Connecting the Xiaomi Mi Wi-Fi Router 4C router to a computer with setting a password for Wi-Fi

The Xiaomi Mi Wi-Fi Router 4C router does not include a patch cord, that is, a cable that would connect from the router to the computer.
Therefore, to configure the router, we will connect via Wi-Fi.
But first, we connect the router to power.

one. In the lower right corner of the desktop we find the wireless network icon.
2. We find an unprotected Xiaomi network, in my case it is Xiaomi_xxxx_xxxx, in your case instead "x" there will be a set of letters and numbers. We are connected to this network:

3. After that, a window with loading the initial settings will appear:

four. Next, we will see the welcome window, where you need to put a tick and click on the button with Chinese characters. Here we agree to the terms and conditions of Xiaomi.

5. In the next paragraph, we immediately proceed to configure the password for the Wi-Fi wireless network.

In the image below one. assign a name to the Wi-Fi wireless network, 2. We come up with any password for a wireless Wi-Fi network, should be more than 8 characters. 3. if we check this box, we assign this password from Wi-Fi to the password on the router interface, that is, to enter and configure the router we will need to enter the same password as on Wi-Fi. four. after entering all the data, click on this button, which means "Save".

Read more:  Recording Phone Conversations On Xiaomi

6. After saving the wireless network settings, we are given the following settings, these are the settings for entering the router. In principle, a step earlier we assigned a password from Wi-Fi to the password for entering the router, but here we can change it, then decide for yourself how you prefer:

I will sign that in the picture one. Login from the router, I advise you to leave it the same 2. Password to enter the router, 3. One password with Wi-Fi network, four. Further.
After applying the settings, the router goes to make changes and reboot:

7. Now you need to reconnect to the Wi-Fi wireless network, since we changed the network name and protected it with a password. To do this, again in the lower right corner of your desktop, click on the wireless network icon:

In my case, I called the network "Sultanov". Do not forget to check the box opposite "Connect automatically" and click on "Connect".

Xiaomi Mi Wi-Fi Router 4C router authorization

After connecting to our network, you need to go to the router. To do this, open any browser (be it Google Chrome, Mozilla Firefox, Internet Explorer, etc.). Looking ahead, I’ll say that through Google Chrome it will be possible to translate the interface into Russian through a special extension.
In the address bar of the browser, enter 192.168.31.1 and press the button "Enter" on your keyboard.

The router interface opens, where we are asked to log in, that is, drive the password into the router interface, if you forget, this is the same password that we configured above. If you checked, then it matches the password on Wi-Fi.

So, we went to the router:

Translation of the Xiaomi Mi Wi-Fi Router 4C interface into Russian

There is a trick on how to translate the Chinese language of the Xiaomi Mi Wi-Fi Router 4C router into Russian, but for this you will need an Internet connection.
To do this, you must:
one. Go to the router through the Google Chrome browser, then follow the link: https://chrome.google.com/webstore/detail/rumiwifi/mbiehbednoakmhlmjcpgpciocekdjabp?utm_source=chrome-ntp-icon and install the extension on the browser:

Read more:  How To Update Ios Through A Computer And Via Wi-Fi - Detailed Instructions

2. After installation, at the top right of the browser, you will see the icon with the Xiaomi logo, you need to click on it, thereby the extension is activated and the text of the interface Xiaomi Mi Wi-Fi Router 4C will automatically be translated from Chinese into Russian:

Translation of the Xiaomi Mi Wi-Fi Router 4C interface into English

The interface of the router itself provides for the English language, but this is only in more recent versions of the firmware.
So, in the router menu, click on:

Next, on the yellow icon, scroll down and select "English", we get the English translation of the Xiaomi Mi Wi-Fi Router 4C router interface:

Password setting on Wi-Fi on Xiaomi Mi Wi-Fi Router 4C router

We set up the Wi-Fi password above, so I’ll show you where the settings are located.
Go to the menu and click on "Settings"further on "Wi-fi settings". If you want to correct the names of networks or change passwords, this is done here:

Xiaomi Mi Wi-Fi 4c Router Setup

PPTP setup on Xiaomi Mi Wi-Fi Router 4C router

one. Go to the interface menu and click on "Advanced"next to the icon "VPN", after the button "Add service".

2. In a popup window in a line "Protocol" choose "PPTP"
3. In line "Name" write any word in Latin,
below in line "Server" specify the ip address of the server,
"Username". Username, "Password". Password.
All of the above data is provided to you by the provider (the organization that conducted the Internet to you).
All these data are usually prescribed in the contract with the provider. If for some reason you could not find them, you need to call your provider’s hotline and find out how to get them.
four. Push "Save". save the settings.

Read more:  Xiaomi Redmi 4a

Configure L2TP on Xiaomi Mi Wi-Fi Router 4C

one. Go to the interface menu and click on "Advanced"next to the icon "VPN", after the button "Add service".

2. In a popup window in a line "Protocol" choose "L2TP"
3. In line "Name" write any word in Latin,
below in line "Server" specify the ip address of the server,
"Username". Username, "Password". Password.
All of the above data is provided to you by the provider (the organization that conducted the Internet to you).
All these data are usually prescribed in the contract with the provider. If for some reason you could not find them, you need to call your provider’s hotline and find out how to get them.
four. Push "Save". save the settings.

PPPOE setup on Xiaomi Mi Wi-Fi Router 4C router

one. PPPOE setting on this router is located separately. Go to the interface menu and click on "Settings"next to the icon "Network settings", below we select the setting"PPPOE".

2. In line "Username" write username
in line "Password". Password.
All of the above data is provided to you by the provider (the organization that conducted the Internet to you).
All these data are usually prescribed in the contract with the provider. If for some reason you could not find them, you need to call your provider’s hotline and find out how to get them.
3. Push "Save". save the settings.

Firmware update on Xiaomi Mi Wi-Fi Router 4C router

Go to the interface menu and click on "Settings"next to the icon "Status", click on the button below "Update". The router must be connected to the Internet, download the firmware itself from the Xiaomi servers.